30LPC
Steel cable chain with aluminum covers
- Chain
- Separators
- End Brackets and Cable Clamps
- Guide Channels
- Materials
APPLICATION TYPE
Sliding Stroke
Vertical Stroke
Main dimensions
Fixed end position
Chain length calculation
SEPARATION SYSTEM
Inner vertical separator
Inner separator with divisor roller
Vertical Separator
The vertical separator must be used to manage the inner space and set the proper space for each cable. Standard mounting every second pitch.
side separator, if present (in red).
ALUMINUM DIVISOR ROLLER
Symmetrical divisor roller
Suitable for the chain:
side separator, if present (in red).
Vertical Separator
The vertical separator must be used to manage the inner space and set the proper space for each cable. Standard mounting every second pitch.
side separator, if present (in red).
APPLICATION TYPE
Sliding Stroke
Vertical Stroke
STEEL END BRACKET SET
Steel end bracket set completes both chian ends and allow for fastening on outer radius and inner radius: mounting position must be specified. Stainless steel can be delivered on request.
End brackets set for
END BRACKETS
TIEWRAP CLAMP
APPLICATION TYPE
Sliding Stroke
Vertical Stroke
GUIDE CHANNEL
SINGLE CHAIN APPLICATION
DOUBLE OPPOSITE CHAIN APPLICATION
MATERIAL
OPEN GUIDE CHANNEL
Open guide channels must be used in all sliding applications. They must be installed on radius runway and are availabe in standard length of 2m. Ordering example for 4 meter channel: 4 sidewalls, 4(+1) joining and support sets and if present 4(+1) base profiles.
A1 = mm; A2 = mm; H1 = mm; H2 = mm; S = mm;
Gude channel for chain
GUIDE CHANNEL WITH ROLLERS
Guide channels with rollers must be used in all sliding applications on the opposite radius runway. Availabe in standard length of 2m. Ordering example for 4 meter channel: 4 sidewalls, 4 rollers sets, 4(+1) joining and support sets and if present 4(+1) base profiles.
A1 = mm; A2 = mm; H1 = mm; H2 = mm; S = mm;
Gude channel for chain
GUIDE CHANNELS WITH POLYDUR BAR
Guide channels with polydur must be used in all sliding applications on the opposite radius runway. Availabe in standard length of 2m. Ordering example for 4 meter channel: 4 sidewalls, 4 polydur sets, 4(+1) joining and support sets and if present 4(+1) base profiles.
A1 = mm; A2 = mm; H1 = mm; H2 = mm; S = mm;
Gude channel for chain
GUIDE CHANNELS WITH STEEL ANGLE PLATE
Guide channels with steel angle plate must be used in all sliding applications on the opposite radius runway. Availabe in standard length of 2m. Ordering example for 4 meter channel: 4 sidewalls, 4 angle plate sets, 4(+1) joining and support sets and if present 4(+1) base profiles .
A1 = mm; A2 = mm; H1 = mm; H2 = mm; S = mm;
Gude channel for chain
GROUND CHANNEL
For the correct functioning, the chain must lay on a flat surface. For this purpose ground channels have to be insalled on chain runway. Standard length from 100 mm to 2000mm, at multiple of 100mm. Upon request length up to 3000 mm can be delivered. In following fields please fill the requested sector length and the sector quantity needed.
A5 = mm; H = mm; S = mm;
Gude channel for chain
BRYLON 6 TECHNICAL DATA
| Norms | Properties | Units | Dry | Conditioned |
|---|---|---|---|---|
| TERMICHE | ||||
| DSC | Melting point (10° C/min.) | °C | ||
| ASTM - D 696 | Coefficient of linear thermal expansion | X10-6 K-1 | ||
| ASTM D 648 ISO 75 DIN 53461 |
Heat distortion temperature ISO 75 1.82 N/mm2 °C 210 DIN 53461 0.45 N/mm2 |
°C °C |
210 220 |
|
| U. L. 94 | Flammability | H.B. | ||
| IEC 695-2-1 | Incandescent wire Temperature °C 650 Thickness |
650 3 |
||
| FLAMMABILITY | ||||
| ASTM-D 257 | Volume resistivity | Ohm cm | 1015 | 1011 |
| ASTM-D 257 | Surface resistivity | Ohm | 1013 | 1011 |
| ASTM-D 149 | Dielectric strength | KV/mm | 22 | |
| ASTM-D 150 | Dielectric constant (10 Hz) | - | 3.8 | 4.5 |
| ASTM-D 150 | Dissipation factor (10Hz) | - | 0.02 | 0.09 |
| PHYSICAL PROPERTIES |
||||
| ASTM-D 792 | Density | g/cm3 | 1.38 | |
| ASTM-D 570 | Water absorption at 23°C in water for 24 hours | % | 0.90 | |
| MECHANICAL PROPERTIES | ||||
| ASTM-D 638 ISO R/527 DIN 53455 |
Tensile yield stress Ultimate elongation |
N/mm2 % |
195 2.6 |
115 4 |
| ASTM-D 638 ISO R/527 DIN 53457 |
Tensile modulus of elasticity | N/mm2 | 10600 | 6900 |
| ASTM-D 790 ISO 178 DIN 53452 |
Flexural strength | N/mm2 | 310 | 190 |
| ASTM-D 790 ISO 178 |
Flexural modulus | N/mm2 | 10500 | 6800 |
| ASTM-D 256 | Unnotched Izod impact strength | J/m | 140 | 300 |
| ISO 180/4C | Notched Izod impact strength | KJ/m2 | 110 | 125 |
| ASTM-D 785 | Rockwell hardness | Scala R | 122 | 114 |
CHEMICAL RESISTANCE
| BRYLON 6 | BRYLON 6 | STEEL | ||
|---|---|---|---|---|
| Chemical agents | Concentration % | Amorphous | Crystal | |
| Methyl acetate | 100 | RB3 | RB2 | RB |
| Acetone | 100 | RB4 | RB | RB |
| Acetic acid (aqueous solution) | 40 | AF | AF | AF |
| Acetic acid (aqueous solution) | 10 | AF | AF | AF |
| Acetic acid | AF | AF | AF | |
| Citric acid | 10 | AD 15 | RD | AD |
| Hydrochloric acid (aqueous solution) | 36 | S | S | S |
| Hydrochloric acid (aqueous solution) | 10 | AF | AF | S |
| Hydrochloric acid (aqueous solution) | 2 | AF | AD | S |
| Chromic acid (aqueous solution) | 10 | AF | AF | AF |
| Chromic acid (aqueous solution) | 1 | RD | RD | AF |
| Hydrofluoric acid | 40 | AF | AF | S |
| Formic acid (aqueous solution) | 85 S | S | AD | |
| Formic acid (aqueous solution) | 40 S | AF | AF | AD |
| Phosphoric acid (aqueous solution) | 10 | AF | AF | S |
| Oleic acid | 100 | RB3 | RB3 | RD |
| Sulphuric acid | 98 | S | S | S |
| Sulphuric acid (aqueous solution) | 40 | AF | AF | S |
| Sulphuric acid (aqueous solution) | 10 | AF | AF | S |
| Sulphuric acid (aqueous solution) | 2 | AF | AD | S |
| Tartaric acid (aqueous solution) | RD | RB | RD | |
| Water | RB10 | RB9 | RD | |
| Chlorine water | RD | RD | AD | |
| Ethyl alcohol | 96 | RD17 | RB3 | RB |
| Ammonia | 10 | RB11 | RB | AF |
| Petrol | 100 | RB1 | RB | RB |
| Bitumen | RD | RD | RB | |
| Potassium carbonate | 100 | RB | RB | AF |
| Sodium carbonate | 10 | RB10 | RB3 | AF |
| Ammonium chloride (aqueous solution) | 10 | RB | RB | AF |
| Calcium chloride (aqueous solution) | 20 | S | S | AF |
| Calcium chloride (aqueous solution) | 10 | RB | RB | AF |
| Sodium chloride | 10 | RB | RB | AF |
| Formaldehyde (aqueous solution) | 30 | RD | RB | AD |
| Fat | RB | RB | RB | |
| Milk | RB | RB | RB | |
| Mercury | RB | RB | RB | |
| Oils | RB | RB | RB | |
| Oil | RB | RB | RB | |
| Paraffin oil | RB | RB | RB | |
| Silicon oil | RB | RB | RB | |
| Diesel oil | RB | RB | RB | |
| Mineral oil | RB | RB | RB | |
| Ozone | AF | AF | AF | |
| Oil | RB | RB | RB | |
| Potassium hydroxide (aqueous solution) | 10 | RB9 | RB3 | S |
| Sodium hydroxide (aqueous solution) | 50 | RD | RD | S |
| Sodium hydroxide (aqueous solution) | 10 | RB5 | RB | S |
| Sodium hydroxide (aqueous solution) | 5 | RB9 | RB | S |
| Aluminium sulphate | 10 | RB | RB | AF |
| Soap (aqueous solution) | RB | RB | RB | |
| Tincture of iodine | AF | AF | AD | |
| Trichloroethylene | RD5 | RD4 | RB | |
| Vaseline | RB | RB | RB |
Legend
The table shows the resistance to chemical agents of BRYLON 6 and Steel. The number by resistance value side shows which is the % weight increase due to swelling.
RB - Very good resistance.
RD - Good resistance.
AD - Limited resistance.
AF - Poor resistance.
S - Soluble.
Amorphous - Polymer in amorphous state.
Crystal - Polymer in crystalline state.
PERFORMANCES
Temperature range: -30°C + 125°C
Speed: 2 m/s
Acceleration: 2 m/s2
VERTICAL STROKE:
Speed: 0,5 m/s
Acceleration: 2 m/s2