Standard clamp set with plastic closing and cable combs for cable anchoring. This part number must be used at the end of the chian.
Standard clamp set for front fastening with plastic closing and cable combs for cable anchoring.This part number must be used at the end of the chian.
Standard clamp set with plastic closing without cable combs. This part number can be used in any position on the chain.
Standard clamp set for front fastening with plastic closing without cable combs. This part number can be used in any position on the chain.
Clamp set for sliding with plastic closing . This part number can be used in any position on the chain.
Clamp set for front fastening and sliding, with plastic closing . This part number can be used in any position on the chain.
Pivoting flange tha can be used with any clamping device. This part number permits to any fastening clamp set and pivoting flange.
Guide support with sliding ring and pivoting. Allow the user to impose a passage point of the chain, leaving all the degree of freedom in every moves.
Protective and revolving ring, mounting anywhere on the chain. This part number protect the chain from bump, abrasion and wear.
Joint between Multiflex chain and conduit, or between Multiflex chain and cable star. This part number must be used with one of the anchoring clamps PASSB-70K or PASSB-70M.
Clamp set with plastic closing . This part number must be used with the part n. PAGB-70/8529.
Clamp set with plastic closing for frontal fastening. This part number must be used with the part n. PAGB-70/8529.
COM_STENDALTO_PASSB70K08583
Globe Joint that allow you to connect the Multiflex and conduit.
Clamp set with plastic closing, to be used in combination with spring and protective ring. This part number must be used to define the reclaiming point of the chain.
Clamp set with Zinc metal closing, to be used in combination with spring and protective ring. This part number must be used to define the reclaiming point of the chain.
Pivoting guide support with sliding ring to be used with spring and protective ring as per following image.
The heat protection jacket features an internal tissue made in Aramid/Kevlar, and an outer tissue made in aluminium. It is used to wrap the MULTIFLEX chain. It protects the chain from weld slags up to 540 °C, and reflects thermal radiations up to 95%.
Kevlar tissue offers good resistance against oils, greases, acids, bases, and solvents in low concentration. The outer tissue also has good resistance against UV rays.
Technical data:
Thickness: 0.35 mm
Specific weight: 1.44 / 1.45 g/cm3
Tear resistance: 2500 N/50 mm
Flammability: non-flammable (DIN 4102 B1)
The heat protection jacket with Velcro strap, features an internal tissue made in Aramid/Kevlar, and an outer tissue made in aluminium. It is used to wrap the MULTIFLEX chain. It protects the chain from weld slags up to 540 °C, and reflects thermal radiations up to 95%.
Kevlar tissue offers good resistance against oils, greases, acids, bases, and solvents in low concentration. The outer tissue also has good resistance against UV rays.
Technical data:
Thickness: 0.35 mm
Specific weight: 1.44 / 1.45 g/cm3
Tear resistance: 2500 N/50 mm
Flammability: non-flammable (DIN 4102 B1)
Heavy spring for AMFM65K, AMFM65M, ASO65
Spring Rate 0,219 N/mm
Wire Ø 5 mm
Weight 1,5 kg/pc
Length L=1000 mm
Material Stainless Steel EN 10270-3/1.4310(X12 CrNi 1808).
Medium spring for AMFM65K, AMFM65M, ASO65
Spring Rate 0,108 N/mm
Wire Ø 4,2 mm
Weight 1,4 kg/pc
Length L=1000 mm
Material Steel EN 10270-1 SH sort C
Medium spring for AMFM65K, AMFM65M, ASO65
Spring Rate 0,246 N/mm
Wire Ø 4,5 mm
Weight 0,7 kg/pc
Length L=550 mm
Material Stainless Steel EN 10270-3/1.4310(X12 CrNi 1808).
Cable star Ø 14 mm (x4)-Ø 20 mm (x4)
Cable star Ø 7,5 mm (x1) - Ø 10 mm (x1) - Ø 12,5mm (x2) - Ø 20 mm (x4)
Cable star Ø 12,5 mm (x1) - Ø 14 mm (x1) - Ø 15,5 mm (x2) - Ø 20 mm (x3)
Cable star Ø 7,5 mm (x2)- Ø 10 mm (x1)- Ø 12,5 mm (x1)-Ø 15,5 mm (x1) - Ø 20 mm (x2)
Cable star Ø 12,5 mm (x1) - Ø 14 mm (x2) -Ø 17 mm (x1) -Ø 18 mm (x3) - Ø 19 mm (x1)
Cable star Ø 12,5 mm (x1) - Ø 15,5 mm (x2) - Ø 17 mm (x1) - Ø 20 mm (x4)
Cable star - no holes
COM_STENDALTO_TKKSB70BLIND
Plug for hole Ø 10 mm
标准 | 属性 | 单位 | 干的 | 调节过的 |
---|---|---|---|---|
热量属性 | ||||
DSC | 熔点 (10°C/min.) | °C | ||
ASTM - D 696 | 热膨胀线性系数 | X10-6 K-1 | ||
ASTM D 648 ISO 75 DIN 53461 |
热变形温度 ISO 75 1.82 N/mm2 °C 210 DIN 53461 0.45 N/mm2 |
°C °C |
210 220 |
|
U. L. 94 | 可燃性 | H.B. | ||
IEC 695-2-1 | 白炽灯丝 温度 厚度 |
650 3 |
||
可燃性 | ||||
ASTM-D 257 | 体积电阻率 | Ohm cm | 1015 | 1011 |
ASTM-D 257 | 表面电阻率 | Ohm | 1013 | 1011 |
ASTM-D 149 | 绝缘强度 | KV/mm | 22 | |
ASTM-D 150 | 介电常数 (10 Hz) | - | 3.8 | 4.5 |
ASTM-D 150 | 耗散因数 (10Hz) | - | 0.02 | 0.09 |
物理属性 | ||||
ASTM-D 792 | 密度g/cm3 | g/cm3 | 1.38 | |
ASTM-D 570 | 在23摄氏度水中24小时内的吸水率 | % | 0.90 | |
机械属性 | ||||
ASTM-D 638 ISO R/527 DIN 53455 |
拉伸屈服应力 断裂伸长率 |
N/mm2 % |
195 2.6 |
115 4 |
ASTM-D 638 ISO R/527 DIN 53457 |
拉伸弹性模量 | N/mm2 | 10600 | 6900 |
ASTM-D 790 ISO 178 DIN 53452 |
抗弯强度 | N/mm2 | 310 | 190 |
ASTM-D 790 ISO 178 |
弯曲模量 | N/mm2 | 10500 | 6800 |
ASTM-D 256 | 无缺口悬臂梁冲击强度 | J/m | 140 | 300 |
ISO 180/4C | 缺口悬臂梁冲击强度 | KJ/m2 | 110 | 125 |
ASTM-D 785 | 洛氏硬度 | Scala R | 122 | 114 |
BRYLON 6 | BRYLON 6 | 浓度 | ||
---|---|---|---|---|
化学制剂 | 浓度 % | 非结晶的 | 晶体的 | |
乙酸甲酯 | 100 | RB3 | RB2 | RB |
丙酮 | 100 | RB4 | RB | RB |
乙酸(水溶液) | 40 | AF | AF | AF |
乙酸(水溶液) | 10 | AF | AF | AF |
乙酸 | AF | AF | AF | |
柠檬酸 | 10 | AD 15 | RD | AD |
盐酸(水溶液) | 36 | S | S | S |
盐酸(水溶液) | 10 | AF | AF | S |
盐酸(水溶液) | 2 | AF | AD | S |
铬酸(水溶液) | 10 | AF | AF | AF |
铬酸(水溶液) | 1 | RD | RD | AF |
氢氟酸 | 40 | AF | AF | S |
甲酸(水溶液) | 85 S | S | AD | |
甲酸(水溶液) | 40 S | AF | AF | AD |
磷酸(水溶液) | 10 | AF | AF | S |
油酸 | 100 | RB3 | RB3 | RD |
硫酸 | 98 | S | S | S |
硫酸((水溶液) | 40 | AF | AF | S |
硫酸((水溶液) | 10 | AF | AF | S |
硫酸((水溶液) | 2 | AF | AD | S |
酒石酸(水溶液) | RD | RB | RD | |
水 | RB10 | RB9 | RD | |
氯水 | RD | RD | AD | |
乙醇 | 96 | RD17 | RB3 | RB |
氨水 | 10 | RB11 | RB | AF |
汽油 | 100 | RB1 | RB | RB |
沥青 | RD | RD | RB | |
碳酸钾 | 100 | RB | RB | AF |
碳酸钠 | 10 | RB10 | RB3 | AF |
氯化铵(水溶液) | 10 | RB | RB | AF |
氯化钙(水溶液) | 20 | S | S | AF |
氯化钙(水溶液) | 10 | RB | RB | AF |
氯化钠 | 10 | RB | RB | AF |
甲醛(水溶液) | 30 | RD | RB | AD |
脂肪 | RB | RB | RB | |
奶 | RB | RB | RB | |
水银 | RB | RB | RB | |
油 | RB | RB | RB | |
油 | RB | RB | RB | |
石蜡油 | RB | RB | RB | |
硅油 | RB | RB | RB | |
柴油 | RB | RB | RB | |
矿物油 | RB | RB | RB | |
臭氧 | AF | AF | AF | |
油 | RB | RB | RB | |
氢氧化钾(水溶液) | 10 | RB9 | RB3 | S |
氢氧化钠(水溶液) | 50 | RD | RD | S |
氢氧化钠(水溶液) | 10 | RB5 | RB | S |
氢氧化钠(水溶液) | 5 | RB9 | RB | S |
硫酸铝 | 10 | RB | RB | AF |
肥皂(水溶液) | RB | RB | RB | |
碘酒 | AF | AF | AD | |
三氯乙烯 | RD5 | RD4 | RB | |
凡士林 | RB | RB | RB |
Legend
这个表格说明了BRYLON 6 和钢对各种化学制剂的抵抗 能力。阻值旁的数字显示的是由于 膨胀而引起的重量增加的百 分比。 这个表格中引用的所有数据 都是实验室设计出的理想值, 都需要在实际应用中进行验 证。.
RB - 极佳的抵抗能力。
RD - 好的抵抗能力。
AD - 有限的抵抗能力。
AF - 差的抵抗能力
S - 可溶解的。
非结晶的 - 聚合物的非结晶状态
晶体的 - 聚合物的结晶状态