Standard clamp set with plastic closing and cable combs for cable anchoring. This part number must be used at the end of the chian.
Standard clamp set for front fastening with plastic closing and cable combs for cable anchoring.This part number must be used at the end of the chian.
Standard clamp set with plastic closing without cable combs. This part number can be used in any position on the chain.
Standard clamp set for front fastening with plastic closing without cable combs. This part number can be used in any position on the chain.
Clamp set for sliding with plastic closing . This part number can be used in any position on the chain.
Clamp set for front fastening and sliding, with plastic closing . This part number can be used in any position on the chain.
Pivoting flange tha can be used with any clamping device. This part number permits to any fastening clamp set and pivoting flange.
Guide support with sliding ring and pivoting. Allow the user to impose a passage point of the chain, leaving all the degree of freedom in every moves.
Protective and revolving ring, mounting anywhere on the chain. This part number protect the chain from bump, abrasion and wear.
Joint between Multiflex chain and conduit, or between Multiflex chain and cable star. This part number must be used with one of the anchoring clamps PASSB-70K or PASSB-70M.
Clamp set with plastic closing . This part number must be used with the part n. PAGB-70/8529.
Clamp set with plastic closing for frontal fastening. This part number must be used with the part n. PAGB-70/8529.
COM_STENDALTO_PASSB70K08583
Globe Joint that allow you to connect the Multiflex and conduit.
Clamp set with plastic closing, to be used in combination with spring and protective ring. This part number must be used to define the reclaiming point of the chain.
Clamp set with Zinc metal closing, to be used in combination with spring and protective ring. This part number must be used to define the reclaiming point of the chain.
Pivoting guide support with sliding ring to be used with spring and protective ring as per following image.
The heat protection jacket features an internal tissue made in Aramid/Kevlar, and an outer tissue made in aluminium. It is used to wrap the MULTIFLEX chain. It protects the chain from weld slags up to 540 °C, and reflects thermal radiations up to 95%.
Kevlar tissue offers good resistance against oils, greases, acids, bases, and solvents in low concentration. The outer tissue also has good resistance against UV rays.
Technical data:
Thickness: 0.35 mm
Specific weight: 1.44 / 1.45 g/cm3
Tear resistance: 2500 N/50 mm
Flammability: non-flammable (DIN 4102 B1)
The heat protection jacket with Velcro strap, features an internal tissue made in Aramid/Kevlar, and an outer tissue made in aluminium. It is used to wrap the MULTIFLEX chain. It protects the chain from weld slags up to 540 °C, and reflects thermal radiations up to 95%.
Kevlar tissue offers good resistance against oils, greases, acids, bases, and solvents in low concentration. The outer tissue also has good resistance against UV rays.
Technical data:
Thickness: 0.35 mm
Specific weight: 1.44 / 1.45 g/cm3
Tear resistance: 2500 N/50 mm
Flammability: non-flammable (DIN 4102 B1)
Heavy spring for AMFM65K, AMFM65M, ASO65
Spring Rate 0,219 N/mm
Wire Ø 5 mm
Weight 1,5 kg/pc
Length L=1000 mm
Material Stainless Steel EN 10270-3/1.4310(X12 CrNi 1808).
Medium spring for AMFM65K, AMFM65M, ASO65
Spring Rate 0,108 N/mm
Wire Ø 4,2 mm
Weight 1,4 kg/pc
Length L=1000 mm
Material Steel EN 10270-1 SH sort C
Medium spring for AMFM65K, AMFM65M, ASO65
Spring Rate 0,246 N/mm
Wire Ø 4,5 mm
Weight 0,7 kg/pc
Length L=550 mm
Material Stainless Steel EN 10270-3/1.4310(X12 CrNi 1808).
Cable star Ø 14 mm (x4)-Ø 20 mm (x4)
Cable star Ø 7,5 mm (x1) - Ø 10 mm (x1) - Ø 12,5mm (x2) - Ø 20 mm (x4)
Cable star Ø 12,5 mm (x1) - Ø 14 mm (x1) - Ø 15,5 mm (x2) - Ø 20 mm (x3)
Cable star Ø 7,5 mm (x2)- Ø 10 mm (x1)- Ø 12,5 mm (x1)-Ø 15,5 mm (x1) - Ø 20 mm (x2)
Cable star Ø 12,5 mm (x1) - Ø 14 mm (x2) -Ø 17 mm (x1) -Ø 18 mm (x3) - Ø 19 mm (x1)
Cable star Ø 12,5 mm (x1) - Ø 15,5 mm (x2) - Ø 17 mm (x1) - Ø 20 mm (x4)
Cable star - no holes
COM_STENDALTO_TKKSB70BLIND
Plug for hole Ø 10 mm
Norme | Propriété | Unité | Sèche | Conditionné |
---|---|---|---|---|
THERMALES | ||||
DSC méthode | Point de fusion (10°C/min.) | °C | ||
ASTM - D 696 | Coeff. D’expansion thermique linéaire | X10-6 K-1 | ||
ASTM D 648 ISO 75 DIN 53461 |
Température d’inflexion (HDT) ISO 75 1.82 N/mm2 °C 210 DIN 53461 0.45 N/mm2 |
°C °C |
210 220 |
|
U. L. 94 | Comportement à la flamme | H.B. | ||
IEC 695-2-1 | Fil incandescent Température Epaisseur |
650 3 |
||
ELECTRIQUE | ||||
ASTM-D 257 | Résistance du volume | Ohm cm | 1015 | 1011 |
ASTM-D 257 | Résistance de la superficie | Ohm | 1013 | 1011 |
ASTM-D 149 | Rigidité diélectrique | KV/mm | 22 | |
ASTM-D 150 | Constance diélectrique (10 Hz) | - | 3.8 | 4.5 |
ASTM-D 150 | Facteur de dissipation (10Hz) | - | 0.02 | 0.09 |
PHYSIQUE | ||||
ASTM-D 792 | Densité | g/cm3 | 1.38 | |
ASTM-D 570 | Absorption H20 à 23°C par 24 heures | % | 0.90 | |
MÉCANIQUE | ||||
ASTM-D 638 ISO R/527 DIN 53455 |
Charge à la rupture et à la traction Allongement à la rupture et à la traction |
N/mm2 % |
195 2.6 |
115 4 |
ASTM-D 638 ISO R/527 DIN 53457 |
Module d’élasticité | N/mm2 | 10600 | 6900 |
ASTM-D 790 ISO 178 DIN 53452 |
Résistance à la flexion | N/mm2 | 310 | 190 |
ASTM-D 790 ISO 178 |
Module d’élasticité à la flexion | N/mm2 | 10500 | 6800 |
ASTM-D 256 | Résistance à l’impact avec entaille | J/m | 140 | 300 |
ISO 180/4C | Résistance à l’impact sans entaille | KJ/m2 | 110 | 125 |
ASTM-D 785 | Dureté Rockwell | Scala R | 122 | 114 |
BRYLON 6 | BRYLON 6 | STEEL | ||
---|---|---|---|---|
Agents | Concentration % | Amorphe | Cristallin | |
Acétate méthyle | 100 | RB3 | RB2 | RB |
Acétone | 100 | RB4 | RB | RB |
Acide acétique sol. aqueuse | 40 | AF | AF | AF |
Acide acétique sol. aqueuse | 10 | AF | AF | AF |
Acide acétique concentrée | AF | AF | AF | |
Acide citrique | 10 | AD 15 | RD | AD |
Acide chlorhydrique sol. aqueuse | 36 | S | S | S |
Acide chlorhydrique sol. aqueuse | 10 | AF | AF | S |
Acide chlorhydrique sol. aqueuse | 2 | AF | AD | S |
Acide chromique sol. aqueuse | 10 | AF | AF | AF |
Acide chromique sol. aqueuse | 1 | RD | RD | AF |
Acide fluorhydrique | 40 | AF | AF | S |
Acide formique sol. aqueuse | 85 S | S | AD | |
Acide formique sol. aqueuse | 40 S | AF | AF | AD |
Acide formique sol. aqueuse | 10 | AF | AF | S |
Acide oléique | 100 | RB3 | RB3 | RD |
Acide sulfurique concentré | 98 | S | S | S |
Acide sulfurique sol. aqueuse | 40 | AF | AF | S |
Acide sulfurique sol. aqueuse | 10 | AF | AF | S |
Acide sulfurique sol. aqueuse | 2 | AF | AD | S |
Acide tartrique | RD | RB | RD | |
Eau | RB10 | RB9 | RD | |
Clore | RD | RD | AD | |
Alcool éthylique | 96 | RD17 | RB3 | RB |
Ammoniaque | 10 | RB11 | RB | AF |
Benzène | 100 | RB1 | RB | RB |
Bitume | RD | RD | RB | |
Carbonate potassium | 100 | RB | RB | AF |
Carbonate sodium | 10 | RB10 | RB3 | AF |
Chlorure ammonium sol. aqueuse | 10 | RB | RB | AF |
Chlorure calcium sol. aqueuse | 20 | S | S | AF |
Chlorure calcium sol. aqueuse | 10 | RB | RB | AF |
Chlorure sodium | 10 | RB | RB | AF |
Formaldéhyde sol. aqueuse | 30 | RD | RB | AD |
Graisse | RB | RB | RB | |
Lait | RB | RB | RB | |
Mercure | RB | RB | RB | |
Huiles | RB | RB | RB | |
Huile | RB | RB | RB | |
Huiles de paraffine | RB | RB | RB | |
Huiles de silicone | RB | RB | RB | |
Gasoil | RB | RB | RB | |
Huiles minérales | RB | RB | RB | |
Ozone | AF | AF | AF | |
Pétrole | RB | RB | RB | |
Potasse caustique | 10 | RB9 | RB3 | S |
Soude caustique | 50 | RD | RD | S |
Soude caustique | 10 | RB5 | RB | S |
Soude caustique | 5 | RB9 | RB | S |
Sulfate aluminium | 10 | RB | RB | AF |
Savon sol. aqueuse | RB | RB | RB | |
Teinture d’iode alcool | AF | AF | AD | |
Trichloréthylène | RD5 | RD4 | RB | |
Vaseline | RB | RB | RB |
LégendE
Le tableau montre le comportement du Brylon 6 et de l’acier rapporté aux agents chimiques. Les numéros marqués à côté des symboles indiquent l’augmentation maximale du pourcentage du poids.
RB - Bonne résistance - stable: Aucune ou faible variation de poids et de dimension, aucune altération.
RD - Résistance moyenne: Modification sensible de poids et de dimension après un certain temps, possible altération de la couleur, diminution des caractéristiques techniques.
AD - Moyennement attaqué: Cependant l’utilisation est encore possible dans des conditions particulières (action des agents dans des temps brefs ou occasionnels).
AF - Fortement attaqué après quelques temps.
S - Soluble.
Amorphe - Polymère à l’état amorphe.
Crystal - Polymère à l’état cristallin.